Hey Everyone, welcome back to Technique Tuesday. |
Thursday, April 30, 2015
Wednesday, April 29, 2015
If You Were Shopping...33: she can quilt
Tuesday, April 28, 2015
The CreativFestival: Crazy Quilter on a Bike!
Monday, April 27, 2015
Elaine's Tech Tips: Crazy Quilter on a Bike!
Friday, April 24, 2015
Construction up in Tiny Town! - Crazy Quilter on a Bike!
Thursday, April 23, 2015
Scraptastic Tuesday and April Winners: she can quilt
Wednesday, April 22, 2015
Over the Garden Fence: Helen Philipps
Tuesday, April 21, 2015
Crazy Quilter on a Bike!: Amish with a Twist II
Monday, April 20, 2015
Making A Table Runner With Pre-Cuts | Quilts By Jen
Where are the Easter Quilts? - The Quilt Studio
Friday, April 17, 2015
Finishing touches on the Darling Diva wall quilt
More fun is to be had today as we put the finishing touches on the Darling Diva wall quilt. I love to see a darling project unfold, and when I'm nearing the end of the project, there's such a great sense of accomplishment and excitement.
- Cut 2" wide binding strips for the top and sides.
- With right sides together, sew the binding strips to the front of the quilt. First to the top and bottom and then to the sides.
- Steam press the binding away from the quilt and, then, in half.
- Fold toward the back and secure with Clever Clips. Slip stitch the binding to the back.
- To create a hanging sleeve, cut a strip of muslin 3" x 14". Turn in the short sides and sew. Fold the strip in half and sew the long side. Turn.
- Press the strip flat. Slip stitch the tube to the top back of the quilt, taking care not to sink the stitches too deeply so they show on the front.
All great works of art deserve to be signed. Create a quilt label, or use one of the many that are available on-line or sold as yardage panels at your local quilt store. Sign your label using a Fabric Fun permanent marker. It can be affixed to the back of the quilt using HeatnBond Quilter's Edge iron on adhesive tape.
Place the quilt on the dowel of the quilt hanger or thread the quilt onto 1/2" wooden dowel. If you're using a wooden dowel, tie a ribbon on each end of the dowel to hang the quilt.
Follow the instructions on the quilt hanger to hang it on the wall.
My time on QUILTsocial is over for now. I hope you enjoyed making this darling wall hanging, the finishing touches on the Darling Diva wall quilt are like the frosting on the cake. Like all divas, I think she is sweet and just a little bit sassy! Until we meet again on QUILTsocial, make a mess and have some handmade fun!
How English paper piecing replaces potato chips
Today, we're going to have fun with making circles and hexagons using the Sew Easy templates to finish embellishing our Darling Diva wall quilt. I never met a gadget I didn't like, and recently, I came across this gadget which makes English paper piecing even easier! Let me show you how English paper piecing replaces potato chips...
I love these templates! The Sew Easy templates, distributed by H.A. Kidd Company Ltd., are durable and come in a fun (and hard to lose) pink-orange color.
The circles and hexagons packages contain nine templates to make pieces from 1/2" to 5" -- and have eliminated the need for me to raid the kitchen cupboard for bowls, cups and glasses to trace a circle. The hexagons will enable me to make my own English paper piecing (EPP) papers.
By the way, EPP is a great stash buster, and a very portable activity that you can take almost anywhere. To make the flower embellishments on the Darling Diva wall quilt, I traced 21 small "hexies" onto sturdy matte photo paper (poster board or old greeting cards work well too). Then, I carefully cut them out along the traced lines.
The following photos are great visuals on how to EPP. One caveat: you'll never make just one! This is a highly-addictive technique. Therefore possibly replacing the urge to eat potato chips.
- Trace the Sew Easy hexagon template onto sturdy paper to create English paper pieces.
- Use a glue stick to dab just a bit of glue on a square of fabric. Cut out the hexi shape, leaving at least 1/8" of fabric around the shape.
- Fold the fabric over the shape, making sure the edges are crisp. Use contrasting thread to tack each corner, all around the hexi.
To make a flower, you need seven hexies -- six joined together around a central hexi.
- Use contrasting thread to tack just the corners of the fabric to the paper template. Pull tightly to make a snug wrap and, therefore, sharp edges.
- Join them using tiny stitches that do not go through the paper, just catch the edge of the fabric. Do your best to make sure the stitches can't been seen on the right side of the joined hexies.
- Press well with steam. Snip the basting threads and ease the papers out of the shapes. These papers can be used over again.
EPP flowers in a flash: the first red polka dotted hexi joined to the aqua center. Note the tiny stitches. Once the paper is removed, you can barely see the joining stitches.
I attach all the hexi "petals" to the center first, then I sew the petals to one another. The shorter quilting sharp needle is essential at this point.
Our Darling Diva wall quilt has been dressed up and is almost ready to be quilted. But first, let's make a sandwich of muslin, batting and the main quilt.
- Spray baste the layers together using 505 fabric adhesive.
- Smooth the layers together. Place the whole quilt in a quilting hoop.
- Use an embroidery needle, threaded with two strands of embroidery floss, to outline the dress and the skirt fans. Remove the quilt from the hoop.
- Spray the flower embellishments with 505 adhesive and attach to the quilt. Attach the flowers to the quilt, just catching the edge of the flower and going through all the layers of the quilt. Don't pull too tightly, or you will create puckers.
I did this, and I had to remove the flowers and start again. It was a dark moment in the creation of the Darling Diva wall quilt. But, that's part of the charm of hand quilting. Sometimes, mistakes happen. They can be corrected with a seam ripper, or they can be become a "design decision". A pucker, in my view, required a seam ripper.
- When the flowers have been appliqued to the quilt, they have also become part of the quilting.
- Use the 1/2" and 1" circle templates and the Heirloom six color retractable pen to trace around circles on the quilt, drifting into the borders. Quilt by hand using Gutermann quilting thread. Again, try not to pull too tightly (see above regarding the unattractive pucker).
I found it easier to stitch the quilting circles while the quilt is not in a quilting hoop. While the circles are placed in a random fashion around the quilt, start the quilting with those closest to the center, and move north, south, east and west around the quilt to keep the tension in the quilt sandwich even.
Finishing the quilt by hand will take some time, but it will add charm. Today we had fun with templates doing fun and funky laser cut circles and hexagons. Come back tomorrow when we bind the mini quilt and make a sleeve to hang it.
Wednesday, April 15, 2015
Dressing up the Darling Diva wall quilt
Now that the wording on our wall quilt is complete, we need to start dressing up the Darling Diva wall quilt. We need to applique it to the main fabric of the wall quilt.
- Cut about 6" of cotton lace.
- Use Fray Check to keep the edges from unraveling.
- Use your sewing machine to sew a line of wide stitches for gathering.
- Pull up the threads to gather the lace so that it fits around the collar of the dress. Tack the lace to the collar. Press.
- Cover three self cover buttons and sew them to the dress, starting at the collar and ending just above the waist.
- Cut a piece of ric rac to cover the area between the waist and the bodice, leaving a 1/4" on either end. Tuck the ends under the dress and press.
- Use a small amount of double sided adhesive tape to attach the ric rac to the bodice.
- Use contrasting embroidery floss to embellish the ric rac on the dress. Insert the needle at the valleys over the trim. (see photo)
- Once the ric rac is embellished, place the dress on an applique mat and lightly spray with 505 Reposition Fabric Adhesive.
- Place the quilt into a hoop, and use a number 10 quilting needle threaded with silk thread to applique the dress to the quilt using small stitches as in the photo.
- Stitch all the way around the dress, but do not pull the stitches too tightly. It will cause unattractive puckers.
- Take the quilt from the hoop and press lightly. Set aside.
It looks like we are done dressing up the Darling Diva wall quilt. Come back tomorrow when we make a quilt sandwich, and have some fun with templates on this Darling Diva wall quilt.
Tuesday, April 14, 2015
Embellishing the Darling Diva wall quilt
Yesterday, we began a darling wall quilt that is helping us bust through that pile of scraps we can't seem to toss aside. Today, we're going to transfer the words that serve as both a motto and a warning to all those who venture near our crafty space. It's all about the work of our hands as we begin embellishing the Darling Diva wall quilt.
There are lots of fancy methods to transfer words and artwork onto fabric for embroidery. I favor a low tech one: a sunny window and a sharp pencil. Lay the wording underneath the neutral fabric so the words are about 2" from the top and about 3" from each side. Pin the wording to the fabric. Tape the fabric to a sunny window. Patio doors are a great choice.
- Trace the wording with a sharp pencil as lightly as possible. Take your time to get all the lines marked.
- Remove the fabric and the tape from the window, and unpin the wording. Touch up any areas you may have missed with the pencil.
- Iron a piece of lightweight interfacing under the wording area and place the fabric in an embroidery hoop. Use an embroidery needle threaded with two strands of embroidery floss. I used a mid-brown shade because it's softer than using black, but you can use whatever color you like.
- My favorite embroidery stitch for outlining is split stitch, as I find I can control the loops and curves. However, back stitch or stem stitch would also work well.
- Try to keep knots to a minimum and as small as possible on the back. Also, don't trail the floss from letter to letter. It will show up on the right side of the work. You'll be happier with the finished results if you embroider small areas, tie off, and begin again in a new area.
That's all for today. I hope you're enjoying the work of our hands: embellishing the Darling Diva wall quilt. Tomorrow, we'll dress up our darling diva, in more ways than one!
WEEKLY GIVEAWAY! Sew Easy Quilting Template
Enter now for your chance to win a set of Sew Easy Quilting Templates, sponsored by H.A. Kidd and Company Limited!
Sew Easy Quilting Templates come in all shapes and sizes and are made to help you explore your creativity. Create hundreds of designs for quilting; sewing; crafting; and scrapbooking.
Contest ends Tuesday Sunday April 19th at 5PM. Get your entries in now!
Congratulations to Diane E.M...winner of the QUILTsocial Weekly Giveaway for a Vintage Postcards Embroidery Album, sponsored by Husqvarna Viking.
How to Enter the QUILTsocial Weekly Giveaway Contest
To enter this contest, log in below through Facebook or with your email, then follow the instructions. You'll be required to comment on any one of our QUILTsocial blog posts, except this one. We do this to encourage you to explore the awesome content on our blog.
Monday, April 13, 2015
A wall quilt for darling domestic divas
I learned to create things at the elbows of some very caring ladies. They were darling divas of domesticity, who knew how to make fancy food worthy of a Bridal Tea, soothe a colicky baby, and make a dollar stretch to feed their families. Sometimes all of this was accomplished simultaneously. They taught me to sew, quilt and embroider. Today, the darling domestic divas remembered through needlework...A wall quilt for darling domestic divas.
Several of them tried mightily (without success) to teach me to knit.
In honor of those darling divas, and their early lessons in wielding a needle and thread, I envision a mini quilt that's put together mostly by hand, using applique, embroidery and embellishment with self-covered buttons.
This little wall quilt can decorate the sewing space of a friend, a cherished family member, or your own space.
I'm finally using a cute quilt hanger I found some time ago in my travels, but you can also use a simple dowel to hang this wall art.
As we create it, we're going to discover several things: a new look for Dresden plate fans, needle turn applique without actually using a needle to do the turning, and template gadgets that can speed up the process of making embellishments like paper-pieced hexagon flowers from that giant pile of scraps on your sewing table.
Let's get started on this little wall quilt.
You will need
- main fabric, in a neutral pattern
- muslin
- fabric scraps in various sizes
- template plastic
- seam ripper
- applique sheet
- embroidery floss
- quilting hoop
- lightweight interfacing
- circle template
- hexagon template
- quilt batting
- basting spray
- small self cover buttons
- silk thread
- quilting needles sizes 8 and 10
- ric rac
- quilt hanger or wooden dowel
Cut
- Patterned neutral fabric 12" x 18"
- muslin 14" x 18"
- batting 14" x 18"
- From fabric scraps, select fabric for the dress bodice and skirt, and muslin to back these pieces.
instructions
- Download and print the templates provided. Make sure your printer is set to "actual size" and/or "no scaling".
- Trace the patterns, using template plastic and a permanent marker. Cut out the shape from the template plastic.
- With right sides together (RST), trace the pattern onto a scrap of fabric and muslin, adding 1/4" seam allowance. Pin and sew around the bodice. Clip curves.
- Use a seam ripper to slice a small opening in the muslin.
- Pull the bodice piece though the muslin.
- Even the seams and press. Set aside for now.
- Trace the Dresden fans of the skirt, adding 1/4" seam allowance.
- Join the skirt pieces together using a 1/4" seam. Take care to match the bottom of the skirt fans just before the scalloped edge. The top of the skirt may appear uneven, don't worry, it will be covered up by a ric rac sash.
- Press the seams of the skirt toward the middle fan. With right sides together, pin the Dresden fans to a piece of muslin. Sew around the outer edge of the skirt piece. Clip curves.
- Slice an opening in the muslin, and pull the Dresden skirt piece through the opening. Press.
- Use a number 10 needle threaded with silk thread to join the skirt to the bodice using a small blind stitch. The ribbon sash will cover any gaps, don't fret.
- From the remaining scraps cut 2 1/2" wide strips. The scraps can be random lengths, but they should all be 2 1/2" wide. Arrange them in a pleasing colorway, and make border strips for the top and side of the neutral fabric, join them using a 1/4" seam allowance.
- Attach these scrappy strips to the top of the neutral fabric using 1/4" seam allowance, and repeat for the sides.
- Press the seam allowances toward the main fabric.
Dear Divas, come back tomorrow when we transfer the words to embroider on this wall quilt for darling domestic divas!
Friday, April 10, 2015
Machine embroidery in the hoop!
Today is the last day with the Husqvarna Viking Designer Ruby Royale and to finish off we'll have embroidery in the hoop!
Can you see my sad face? Well not too sad since I had a weak moment and bought a new sewing machine, but SHHH - don't tell my husband! I've enjoyed every minute with the Ruby Royale. There isn't one thing that it hasn't been able to do for me. I've a few skill sets that need to be upgraded, but the Ruby? Nope - she was perfect!
There's one area of embroidery that I've been wanting to try for a long time, but never got around to it. I thought it would be good to experiment and let you see what happened.
Actually, I wanted to show you how easy this is.
There are projects that you can create right in the embroidery hoop! Yes - projects that are basically embroidered and sewn in the hoop!
I've never done this before although, I had a basic idea of what needed to be done, so here goes - let's check it out together.
Keep in mind that I had basic instructions, no training and used what supplies I had on hand - yes - I did it late one night, so one must use what one has. Admit it - you've done the same thing. That's our reason (excuse) for stockpiling so much stuff so that when we sew in the middle of the night, we'll never run out of supplies!
That's my story and I'm sticking to it!
Let's get started
The first step is to load the project design into the Ruby Royale. This was an easy process. I saved the file that had been sent to me by e-mail to a USB stick and inserted the stick into the USB port on the Ruby Royale.
Then I brought up the design onto the screen. It really couldn't have been easier to get that design. And there are MANY projects that you can buy on-line and they're sent directly to your e-mail account. It's easy to store them on your computer or USB stick and have easy access to them when you want to use them.
The project instruction sheet indicated the size of the embroidery - 3.3" x 5" - I guess that's going to have to go into the Royal Hoop. I was about to hoop the fabric when I thought - nope - I'm hooping only the stabilizer. I was going to hoop only one layer, then I thought better of that idea and hooped two layers of stabilizer.
Remember - this is the first time I'm doing this type of project so I had no choice but to follow the directions - well sort of!
The Ruby Royale stitched the perimeter of the piece several times and stopped. Hmmmm - now what do I do?
Ah - this is where I add the outer layer of fabric. The outline of the stitching shows me where to position the fabric. I measured the outline of the shape and cut a piece slightly bigger and laid it over the stitching.
Then hit START/STOP button
Let's see - what's next? AH - time to add the lining fabric. Take the hoop out of the embroidery arm and turn the hoop upside down. Yes - I can see where the lining fabric goes.
I cut the lining fabric slightly larger than the outline of the shape. The instructions said to pin it in place, which I did, but I only used two pins. Surely that's enough?
Now that the top and bottom fabrics are stitched in place, what happens next? Can't wait to see (although if I really wanted to know - I could look at the order of the stitching on the right hand side of the screen and I would have known, but I wanted each segment of stitching to be a surprise!)
When I hit the START/STOP button again, the embroidery stars were stitched out. So far this is a painless and super easy process.
Perhaps I should call the next section "how to save a project" because of course I ran into "issues". However I was able to recover from both of the issues and the project turned out just fine! Just watch what happens. Who said sewing/embroidery/quilting isn't exciting?
And perhaps starting with a more full spool of thread would help!
While I did not have the same color of thread, I did manage to find something that was so similar that you can't tell I ran out of thread! Since it was late at night, stores are closed - I got creative and did what I could with what I had. Trust me - that's when creativity kicks in!
Happens to me all the time. Don't try this at home unless you have a high tolerance to stressful situations. Thankfully I'm immune to most stress.
I had to trim the excess fabric from the top piece and at the same time, managed to fix that little boo-boo on the back.
A bit more stitching and then trimmed the excess fabric from the lining.
The inside of the embroideries are always a bit rough to the touch, so I fused a piece of lightweight stabilizer to the inside of the piece. Notice that I was able to "fix" that boo-boo with the lining fabric.
Folded the project in half (there was even a stitch line showing where the item was to be folded) and sewed the side seams with matching thread on the sewing machine. Notice that the boo-boo with the lining fabric doesn't show?
And you have........
A neat pouch for your cell phone.
Now isn't that exciting? I was very impressed and can't wait to try another project. There are all kinds of bags (even with zippers) and other items that you can do in the hoop. Now that I'm "experienced", I'll be able to do an even better job.
This post brings to an end my adventures with the Husqvarna Viking Designer Ruby Royale (at least those adventures I'm sharing with you). I hope you've enjoyed the journey as much as I have. The sewing machine abilities are incredible - there are so many possibilities, it's hard to sleep thinking of all that you can do with it! And the fact that the Ruby Royale is also an embroidery machine - well I just can't live without the ability to do machine embroidery.
I think I just added a few more projects to my to do list.
Stay tuned - I will be back with another Husqvarna Viking sewing machine. Can't wait to see what the next one can do and I'll have more great projects, tips and tricks for you.
Have a great day!
Ciao! PS - keep those comments comings. We love to hear what you are working on, send us pictures of your projects - we love to share.
Thursday, April 9, 2015
7 Quilting design elements to add personality
Before we reveal the two quilts for the What's Good for the Gal, is Good for the Guy quilt challenge in the QUILTsocial eZine spring issue, let me give you a 'tour' of the design process and elements and the inspiration behind it. Here are 7 quilting design elements to add personality to this quilt:
- incorporating the interests of the recipient into the quilt top (duplicating bricks and mortar and the house)
- quilting the vine
- adding a jean pocket to remember a beloved family member and clever label
- using embroidery to 'say what you need to say' on the quilt top and backing
- add special tags
- making the story of the quilt special by incorporating a little history
- using a forgiving quilt backing
If you've been following QUILTsocial, you know that Jen was working on a quilt for the guy and I was working on the quilt for the gal.
You can check back here for more details on the challenge.
Although I never met the recipient of the quilt, I was provided with a few details of her likes which includes things that are vintage, rustic and countryside scenery. She's studying architecture and is highly creative. She would love to live in a real functioning tree house, or a house in the forest.
Hmmm - I was getting a recurring theme here - houses! I also thought about some of the other requests - no traditional borders, try to highlight the theme fabric. That was a lot of information to decipher and come up with something creative.
The Design
I wanted to keep the elements in the quilt simple. I also wanted the elements in the quilt to be subtle. And somewhere in the quilt, I wanted a house.
We had received a package of 10-inch squares of fabric to work with. Not a lot of room for error and I really wanted to showcase the fabric by not cutting it up much.
Hmmmm - I could make the quilt look like a brick wall and incorporate the subtle elements onto the wall. Yes - that would work, and I proceeded to cut the 10-inch squares into "bricks" that were 10" x 5". Absolutely no waste from the fabric pieces.
Although I do have a few bits left over which I'm making into another project (a gift for Carla) which you'll see in an upcoming post.
Next up was to add some mortar to the mix. It was very difficult choosing a color - I wanted to keep it neutral to help highlight the focus prints, I wanted it to be somewhat realistic and I eventually went with a gray.
So now that I had the mortar color picked out, I had a couple of other issues that I had to take care of that involved piecing and pressing.
Although real bricks wouldn't have exactly matched up from row to row, I wanted my bricks to match. So I used a chalk pencil to mark where the seams for each row should go in order to have the bricks in alternating rows line up properly.
Next up was the pressing. If you look at the mortar on a brick house, you'll notice that it recedes from the surface of the bricks. In order to replicate that look, I had to press the seams away from the mortar to make it recede from the bricks (focus fabric). That meant I had to press the seams back against all those cross seams. This is the opposite to how I would have pressed it, but I was going for a certain effect and so those seams were pressed that way.
I like to use steam when I press so it wasn't a big deal, and I was very happy with the end result. A very very subtle effect, but it's something that I would notice (hey - I like small details!) Do you see how flat my seam allowances are? A little steam will do wonders!
The House
I had been pondering how to incorporate a house into the bricks. Initially, I was going to put a small house into one (or several) of the bricks, but after chatting with a very creative thinker (Tish), she suggested that I build the house bigger with the bricks.
I looked through the fabric pieces and YES - there was a way to make the house fit that approach and so the house was built into the bricks.
That created a new dilemma - how to maintain the mortar pattern through the house. I wanted the house to be subtle - but if I had used the gray fabric, the house wouldn't have been noticeable at all as all the prints are very busy. So I changed the color of the mortar so that the house would be more noticeable. But then what to do with the sides of the house?
No design effort goes off without collaboration. My daughter (who is the same age as the recipient) and I were discussing the mortar (sashing) and we both agreed that the gray had to be incorporated to make the house noticeable. I won't tell you how many times I had to measure and remeasure to get those pieces replaced. Don't forget to add a quarter inch seam allowance - DUH!
The windows and doors were cut from one of the fabrics in the line Tim Holtz (Eclectic Elements) and fused in place. Then outlined with a satin stitch.
I've had discussions related to the stories that people dream up about their quilts. Do they think of everything before the quilt is made or do they make the story up after the quilt is done? I do a bit of both. I really have a hard time sitting down and planning all the details out - I just let it happen which has driven everyone I work with absolutely crazy.
As I sat back and looked at this house, I realized that it reminded me a great deal of an abandoned house from the area that I grew up. So I phoned mom and dad in Saskatchewan and asked them to photograph the said house. I think they enjoyed the assignment even though they had to make three trips before they got the pictures - no batteries, dead batteries - you see, my technology issues are genetic!
I learned the history of the house which has been abandoned for a long, long time (50 years) and I'm going to include a picture of the house and the story with this quilt.
The Poem
If you have been following my story on the Husqvarna Viking Designer Ruby Royale, you know that I love words on quilts. I wondered how I could incorporate words onto this quilt. I happened to be reading a book called Art Quilt Maps by Valerie S. Goodwin. Hey - she has used words on some of her art quilts, not embroidered words, but words nonetheless. She often incorporates Haikus, which is a style of poetry. I've been known to write poetry in my time so I sat down and wrote out a Haiku.
Once I was happy with the text, I placed the quilt top in the embroidery hoop and hit START. It's moments like these that you hope everything goes well. There was no turning back. I breathed a huge sigh of relief when that part was completed.
Again, I wanted this poem to be subtle. Almost like I didn't want it to be seen unless the observer 'felt' the words. It was hard to choose a color of thread that would completely blend in, but I'm happy with the results. And for someone who doesn't do a lot of embroidery, I hooped it pretty straight!
The quilt back
We were also given instructions to make the back more than just a plain back. I was using a flannel from the Man about Town flannel collection from Northcott Fabrics. It's a gorgeous fabric, mottled enough to be a great backing concealing a multitude of sins.
I embroidered a message on the back. I had to be careful where the message went so that when the quilt was layered, the message was in the right spot. Again - I went for subtle and chose a thread color that stood out, but not too bright.
The Quilting
As you know from yesterday's post that I struggled with the quilting. Not because of the Ruby Royale, but my area of expertise or lack thereof.
I had a vision and I wasn't able to execute it on the domestic sewing machine. The picture below was my inspiration with the addition of leaves.
After removing all the quilting, I did the quilting on the long arm and I was pleased with the results.
The label and the pocket
We were also asked to incorporate a denim pocket onto the back of the quilt. The pocket was from a pair of jeans that had belonged to a family member who had since passed.
I thought of the pocket and the label many times over the course of making the top. I had this vision, then I had another and when the time came to attach the pocket, the design just happened all by itself.
At first, I was going to make a tag and incorporate it with the pocket. So I took a piece of fabric and ran it through the ink-jet printer to get the tag.
It's very easy to do this - I first designed and printed the label on paper. Then carefully taped (very well) a piece of fabric over the writing on the paper. Then reprint the label using that piece of paper with the fabric taped to it. And voila! - you'll have printing on your fabric.
TIP I only use black ink (ink-jet only) for this purpose as colored inks are not permanent unless treated.
Now I had to embroider a message onto the pocket. ACK - that pocket is too small to hoop but I used a sticky stabilizer and stuck the pocket to the stabilizer.
Choosing the lettering was easy as pie using the built in fonts on the Ruby Royale. No need to bring up a computer program - ALL of the printing on this quilt was designed directly on the Ruby Royale Embroidery Edit screen. It just doesn't get any easier than that. The flexibility in this area is phenomenal. And when I think of what I used to have to do to get lettering - well I shudder at that complicated process.
Before I hooped the pocket, I marked the center lines of the pocket so I could center it in the hoop. Notice the chalk lines are lining up with the center notches on the hoop.
Then it was easy to use the on-screen tools to center the words and position them just right.
Embroidered designs can be a bit rough on the underside. Since I wanted to keep the pocket usable, and therefore soft to the touch, I applied a lightweight fusible to the underside of the pocket to cover up the back side of the embroidered message.
As I was working on the lettering for the pocket, I changed my mind about the tag. I would incorporate the wording as if it were a tag right into the stitching of the pocket, and let's not forget the trademark label that I put into things that I make!
I was going to have to hand stitch the pocket/label elements to the back of the quilt and I certainly did not want to have to handstitch that denim pocket down.
So I stitched everything to a leftover piece of the backing fabric. Everything was top stitched with the Ruby Royale and then the background of the pocket/label was trimmed down and hand stitched to the back of the quilt. If you didn't know that detail, you may not realize it unless you look closely. The busy backing is great camouflage for that kind of thing.
One more note about quilting designs
I frequently have discussions with customers about the style of quilting designs. Should it be overall or should it be custom. In this case, I did not want any of the elements to be highlighted and my inspiration of the vines would add to the feel that this was a brick wall.
The following series of pictures shows detail of the quilting over the various elements and you can see that not once does the quilting detract or interfere with the design elements.
Choosing the appropriate, and in this case, very neutral threads makes the quilting design part of the quilt. It adds to the total look and feel of the quilt, but doesn't steal the show!
And there you have it. What an interesting project. I love a challenge and this one certainly was challenging. But I am very happy with the end result.
It was exciting to use the Husqvarna Viking Designer Ruby Royale to make this quilt. The embroidery was easy regardless of the surface I worked on, the lettering was easy to select and everything was built into the Ruby Royale.
Tomorrow I am going to wrap up my adventure with the Ruby Royale with another embroidery project. Something I have wanted to try for a long time. Stay tuned for that.
Be inspired to add character to your quilts. I hope you enjoyed a tour of my 7 quilting design elements to add personality to your quilts. Ciao!
PS - Thanks Jen for letting me have the Gal quilt. I am sure I would have come up with something for the Guy, but I had fun working for the Gal.